Jetta Corporation

Your tub will come with a 6' section of blower hose attached to the tub. This connection shoud not be removed. Additional lengths of blower hose can b...

There is room, but this should be done carefully, following these considerations.  Do Not drill under the integrated linear overflow; doing so will render...

Thank you for your inquiry!  Additional cables can be ordered through your distributor under Jetta part number 01-31-0514.  For additional informati...

The tub will come with a 6' length of blower hose attached to the tub. This connection should not be removed, but the blower hose can be cut in the ce...

An air vent is necessary for the proper functioning of the blower. This vent should be 2” x 4” or larger.

Thank you for your inquiry!  When your remote becomes slow to respond, you likely need new batteries. The remote is watertight, so disassembling it requ...

Thank you for your inquiry!  Your floating remote is easily programmed to customize your bathing experience. Watch this helpful video for detailed instr...

Use one 1” hose clamp to connect the blower hose to air output fitting on the blower.

Thank you for your inquiry!  Your new floating remote must be paired with the controller. With the remote near the unplugged control box, depress th...

The blower has four mounting points for use in securing to a wood surface like the floor of an attic or cabinet or on the shelf of a closet. The blower shou...