Thank you for contacting Jetta!
We are happy to help. Below are step-by-step instructions.
This is to reset the control box to be reprogrammed.
- If the control box is unplugged plug it into the GFI.
If it has been plugged in, unplug it for 10 secs and plug it back into the GFI.
Press the air button in and hold until a white LED light appears on the blue control box.
This should take approximately 10 secs. The White LED Light indicates that the control box is in programming mode.- Once the LED light is white, release the air button.
- To select the correct program, see the program list below and number of depressions to make for its selection.
- Program 1 is indicated by a Red LED light on the control box. This program features 3 speeds (High, Medium, and Low) for the blower, with a 20-minute automatic turn-off timer and our standard purge cycle. - To select this program, press the air button once. It should only take about 10 seconds for the light to turn from white to red, indicating that Program 1 has been selected.
- Program 2 is indicated by a Green LED light on the control box. This program features a Multi-Speed blower (not just High, Medium, and Low) with a 20-minute automatic turn-off timer and our purge cycle. - To select this program, press the air button twice quickly. It should only take about 10 seconds for the light to turn from white to green, indicating that Program 2 has been selected.
- Program 3 is indicated by a Blue LED light on the control box. This program features only an off/on blower function with a 20-minute automatic turn-off timer and our purge cycle. - To select this program, press the air button three times quickly. It should only take about 10 seconds for the light to turn from white to blue, indicating that Program 3 has been selected.
- Program 4 is indicated by a Turquoise LED light. This program is not suggested as it does not have the standard purge cycle clearing out access water from the airlines. - To select this program, press the air button four times quickly. It should only take about 10 seconds for the light to turn from white to Turquoise, indicating that Program 4 has been selected. This program features a high and low setting only.
- After programming the control box twice, it will need to be unplugged to reset and be able to program again for a third/fourth time. After every two programs, it will need to be unplugged to be programmable again.
- After you have selected your preferred program, plug the blower into the control box. Once plugged in, the blower is operated by the selected control box program.
Also, see this helpful instructional video - https://youtu.be/GRM4EzzpDdM.
Thank you for choosing Jetta!